Bertazzoni F30CONXE Anleitung zur Fehlerbehebung

 INSTALLATION,USE&CAREMANUAL 30”BUILT‐INOVEN F30CONXE(F7..PQC1XE.UA)F30CONXT(F7..PKC1XE.UA)F30PROX(F7..PAZ1XE.UA)F30PR

10PRODUCT SPECIFICATION DESIGN SERIES OVENS (CON MODELS) Electrical requirements 120/240V - 5500W (24 A max) or 120/208V – 4400W (21 A max). Upper

11INSTALLATION INSTRUCTIONS INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS WITH THE OWNER. Electrical connection CAUTION: Before installing the oven,

12WIRING DIAGRAM Models: F30PROX - F30PROXE - F30PROXT

13WIRING DIAGRAM Models: F30CONXE - F30CONXT

14 CUT-OUT DIMENSIONS IMPORTANT Kitchen cabinets shall be made of materials capable of withstanding temperatures at least 117°F (65°C) above room te

15INSTALLING THE OVEN STEP 1 Fix the supplied skid plates to the cabinet floor. STEP 2 Prepare the door for removal. Flip up the locking clamps

16GETTING STARTED 1 Control Panel (KNOBS only presents on PRO models) 2 Cooling exhaust 3 Self-clean cycle door lock 4 Lights 5 Food probe po

17When inserting a rack, always check that the safety notches are at the back. To remove racks, raise them upwards and pull out. TELESCOPIC RACKS T

18USING THE LCD DISPLAY DESIGN SERIES OVENS (CON MODELS) PROFESSIONAL SERIES OVENS (PRO MODELS) A Touch control areas B LCD Display C Te

ICONS LEGEND Timer Light Settings menu Start Scroll left/right and up/down Confirm selection Remove selection or leave menu Stop cooking

BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.BERTAZZONI-ITALIA.COM FROM THE DESK OF THE PRESIDENT Dear new owner of a Bertazzoni

20SETTINGS Activate SETTINGS menu with Select field with and confirm Set the desired values with and confirm Leave menu Notes ECO mo

21 BEFORE USING THE OVEN Before using the oven for preparing food:  Remove the protective film from the oven door and control panel  Remove all a

22BASIC OPERATION - DESIGN SERIES MODELS START Activate the oven by touching any control area for 2 seconds. Start programming with Select COOKIN

23BASIC OPERATION – PROFESSIONAL SERIES MODELS START Activate the oven by turning the COOKING MODE knob (right) Select COOKING MODE by turning the

24TIME MANAGEMENT MENU – TIMER, DELAY/END COOKING, FOOD PROBE START After programming the oven for cooking, touch or to enter the time management

25DELAY START The oven will start at a desired time. Activate DELAY START Set desired time before oven will turn on and confirm Leave menu The

26 Connect the probe jack to the port located in the upper left side of the oven cavity. Place the food in the oven and confirm The display will

27COOKING MODES GUIDE MODE DETAILS USE FOR/TIPS BAKE Bake and broil elements ON Convection OFF Temperature 100F - 500F Use lower 2 shelf levels.

28BROIL / CONVECTION BROIL The broil element operates on 4 different power levels. The element is heated for the first 3 minutes at maximum power and

29 TIPS FOR BEST RESULTS - BAKING CHECK PACKAGE DIRECTIONS FOOD PAN SIZE TEMPERATURE COOKING TIME (minutes) LEVEL Cookies 12”x15” Cookie Sheet 3

3 TABLE OF CONTENTS APPLIANCE INFORMATION ______________________________________________ 4WARRANTY AND SERVICE ________________________________

30 TIPS FOR BEST RESULTS - DEHYDRATE FOOD PREPARATION APPROXIMATE TIME (hrs) DONE WHEN… Apples Cut in ¼” slices and dip in 1/4 cup lemon juice + 2

31 ASSISTANT FUNCTION Available on XT models only Developed with the help of Italian professional chef consultant Roberto Carcangiu, Bertazzoni’s ex

32START Activate the oven by touching any control area for 2 seconds. Start programming with Select ASSISTANT with or with right knob and conf

33Important Pre-programmed sequences have been calibrated for cooking food starting from room temperature. If using frozen food for a dish, defrost

34 SAVE The ASSISTANT stores your latest cooking sequence for future use. Select ASSISTANT with or with right knob and confirm Select SAVE wi

35 RETRIEVE To retrieve a previously stored personal sequence follow these simple steps. Select ASSISTANT with or with right knob and confirm S

36 SABBATH MODE This special program is designed for religious observances. START Activate the oven by touching any control area for 2 seconds. St

37SELF-CLEANING CYCLE DESCRIPTION In the self-cleaning cycle, the oven cavity is heated to very high temperatures to burn off any residue on the ov

38CLEANING THE OVEN FRONT Clean spills from the front of the appliance immediately. Spills may cause discoloration of the glass and steel surfaces.

39 REPLACING THE OVEN LIGHTS WARNING! Disconnect power before servicing unit. To replace the oven light bulb, remove the protection cap. It is not

4APPLIANCE INFORMATION MODEL _____________________________________________________ DATE INSTALLED __________________________________________

40TROUBLESHOOTING GUIDE OVEN PROBLEM POSSIBLE CAUSES AND/OR REMEDY Oven does not function Range is not connected to electrical power. Ask a profes

41 BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.BERTAZZONI-ITALIA.COM

SPAREPARTSLIST F30CONXE F30CONXT F30PROX F30PROXE F30PROXT800584 800584 800584 800584 800584800586 800586 800585 800585 800585800587 800587 8005

1411 411127 GASKETFOROVENFRONT 1 1 1 1 11414 602050 THERMOSWITCH 1 1 1 1 11415 602051 THERMOREGULATOR 2 2 2 2 21421 406462 INTERNALOVENGLASS 3 3







5WARRANTY AND SERVICE All Bertazzoni products are covered by a 2 years parts and labor warranty. Service on all Bertazzoni products shall be carried

6IMPORTANT SAFETY INSTRUCTIONS Read these instructions before installing or using the oven for the first time. Save these instructions and review the

7Oven use WARNING! Ovens can produce high temperatures that can cause burns. Prevent children from touching the appliance while in use. Use heat-re

8consistency of the food, and recipe. Germs present in the food are killed off only at a sufficiently high temperature (> 158F / 70C) and after a

9PRODUCT SPECIFICATION PROFESSIONAL SERIES OVENS (PRO MODELS) Electrical requirements 120/240V - 5500W (24 A max) or 120/208V – 4400W (21 A max).